Configura i passaggi della sequenza, i tipi di uscita, i tempi e l'esecuzione ciclica.
- 4 steps sequence
- Adjustable delay between each step
- Single sequence execution on trigger or cyclic while the trigger is active
- Output type and value configurable for each step from the following objects
- Switch - DPT 1.001
- Scene - DPT 18.001
- Percent value - DPT 5.001
- RGB Color value - DPT 232.600
- Tunable white value (Brightness & Temperature)
- 1-byte unsigned value (0-255) - DPT 5.005
- 2-bytes unsigned - DPT 7.*
- 2-bytes signed - DPT 8.*
- 2-bytes float - DPT 9.*
The channel can be blocked from the KNX bus using the “Block” communication object. When a channel is blocked, Input trigger is not taken into account.
Parameters
| PARAMETER | VALUES | DESCRIPTION |
|---|
| Channel description | Text | Text displayed in the channel menu and in the group objects name of this channel |
| Sequence execution | When received ON trigger When received OFF trigger When received ON or OFF trigger Cyclic while ON Cyclic while OFF | Selection on the sequence trigger value or if the sequence is executed cyclically |
| Duration unit | 100ms seconds (default) minutes | Duration units for the transition delay between each step. |
| Sequence Step x (1 to 4) | | |
| Output type | Not used (default) Switch - DPT 1.001 Scene - DPT 18.001 Percent value - DPT 5.001 RGB Color value - DPT 232.600 Tunable white value (Brightness & Temperature) 1-byte unsigned value (0-255) - DPT 5.005 2-bytes unsigned - DPT 7. 2-bytes signed - DPT 8. 2-bytes float - DPT 9.* | Datatype of the value to be sent on the bus when the step is activated |
| Send value | 0 (default) Value range based on the selected output type range | Value to be sent on the bus when the step is activated |
| Step duration | 0 (default) 0..255 | Delay for the transition to the next step based on the “duration unit” parameter. |
Communication objects
| NR | NAME | FUNCTION | SIZE | FLAGS | TYPE |
|---|
| 1 | Block | On/Off | 1 bit | CRW | 1.003 - enable |
| 2 | Trigger | On/Off | 1 bit | CRW | 1.017 - trigger |
| 3 * | Step 1 Output - Value | True/False | 1 bit | CRT | 1.001 - switch |
| 4 * | Step 2 Output - Value | True/False | 1 bit | CRT | 1.001 - switch |
| 5 * | Step 3 Output - Value | True/False | 1 bit | CRT | 1.001 - switch |
| 6 * | Step 4 Output - Value | True/False | 1 bit | CRT | 1.001 - switch |
| 7 | Step 1 Output - Brightness | Percent | 1 byte | CRT | 5.001 - percentage |
| 8 | Step 2 Output - Brightness | Percent | 1 byte | CRT | 5.001 - percentage |
| 9 | Step 3 Output - Brightness | Percent | 1 byte | CRT | 5.001 - percentage |
| 10 | Step 4 Output - Brightness | Percent | 1 byte | CRT | – percentage |
- Depending on the chosen datatype for the output of each step, these group objects can have the following configurations:
| NAME | FUNCTION | SIZE | FLAGS | TYPE |
|---|
| Step x Output - Switch | True/False | 1 bit | CRT | 1.001 – switch |
| Step x Output - Scene | Scene | 1 byte | CRT | 18.001 – Scene control |
| Step x Output - Percent | Percent | 1 byte | CRT | 5.001 – percentage |
| Step x Output - RGB | RGB | 3 bytes | CRT | 232.600 – RGB value |
| Step x Output - Temperature | Percent | 1 byte | CRT | 5.001 – percentage |
| Step x Output - Value | 1 byte | 1 byte | CRT | 5.005 – 1-byte unsigned |
| Step x Output - Value | 2 bytes | 2 bytes | CRT | 7.x – 2-bytes unsigned |
| Step x Output - Value | 2 bytes | 2 bytes | CRT | 8.x – 2 bytes signed |
| Step x Output - Value | 2 bytes | 2 bytes | CRT | 9.x – 2 bytes float |
Manual navigation
All manual articles
