Vai al contenuto
Elausys

Gateway KNX per Inverter / Manuale utente INV-KNX SMA

Firmware e dati tecnici

Firmware applicabile, procedura di aggiornamento e specifiche elettriche e di installazione per INV-KNX SMA.

elausys · 19 settembre 2026
In questa pagina

Firmware version and update

This manual and the related ETS application apply to firmware V3.2.3.1 and above. Read the firmware version in the top-right corner of the gateway webpage or read GO 2 in ETS.

If Elausys provides updated firmware for this device, open FW Update on the gateway webpage, select the supplied binary file and press Update. After updating, read the firmware version again and repeat the communication and measurement checks in Section 7.

Technical data

SpecificationValue
Auxiliary supply12-30 VDC / GND, screw terminal
KNX bus current< 16 mA at 29 VDC, typical
Operating temperature+5 °C to +45 °C
Enclosure width2 space units (2 modules)
MountingDIN rail
KNX terminalPluggable red/black micro terminal, 4-pole PUSH WIRE; solid conductor wire 0.6-0.8 mm² as stated in the source
KNX bus voltage29 VDC

Product information and support: elausys.com. Related document: KNX Logic Module User Manual. SMA configuration reference: Sunny Explorer user manual or the manual for the installed inverter.

Manual navigation

All chapters of the INV-KNX SMA user manual

Domande frequenti

A quale firmware del gateway si applica questo manuale?

Questo manuale e la relativa applicazione ETS si applicano al firmware V3.2.3.1 e successivo.

Dove posso leggere la versione del firmware installata?

Apri la pagina web del gateway. La versione del firmware installato appare nell'angolo superiore destro.

Come installo il firmware fornito per il gateway?

Apri FW Update nella pagina web del gateway, seleziona il file binario fornito e premi Update.

Continua a esplorare

Trova le altre guide per questo prodotto nella documentazione.

Torna a Manuale utente INV-KNX SMA