Zum Inhalt springen
Elausys

KNX-Gateways für Wechselrichter / INV-KNX SMA Benutzerhandbuch

Firmware und technische Daten

Gültige Firmware, Aktualisierung und elektrische sowie installationsbezogene Daten für INV-KNX SMA.

elausys · 19 September 2026
Auf dieser Seite

Firmware version and update

This manual and the related ETS application apply to firmware V3.2.3.1 and above. Read the firmware version in the top-right corner of the gateway webpage or read GO 2 in ETS.

If Elausys provides updated firmware for this device, open FW Update on the gateway webpage, select the supplied binary file and press Update. After updating, read the firmware version again and repeat the communication and measurement checks in Section 7.

Technical data

SpecificationValue
Auxiliary supply12-30 VDC / GND, screw terminal
KNX bus current< 16 mA at 29 VDC, typical
Operating temperature+5 °C to +45 °C
Enclosure width2 space units (2 modules)
MountingDIN rail
KNX terminalPluggable red/black micro terminal, 4-pole PUSH WIRE; solid conductor wire 0.6-0.8 mm² as stated in the source
KNX bus voltage29 VDC

Product information and support: elausys.com. Related document: KNX Logic Module User Manual. SMA configuration reference: Sunny Explorer user manual or the manual for the installed inverter.

Manual navigation

All chapters of the INV-KNX SMA user manual

Häufig gestellte Fragen

Für welche Gateway-Firmware gilt dieses Handbuch?

Dieses Handbuch und die zugehörige ETS-Anwendung gelten für Firmware V3.2.3.1 und höher.

Wo kann ich die installierte Firmwareversion ablesen?

Öffnen Sie die Webseite des Gateways. Die installierte Firmwareversion wird oben rechts angezeigt.

Wie installiere ich die für das Gateway bereitgestellte Firmware?

Öffnen Sie FW Update auf der Webseite des Gateways, wählen Sie die bereitgestellte Binärdatei aus und drücken Sie Update.

Weiter erkunden

Finden Sie die weiteren Anleitungen zu diesem Produkt in der Dokumentation.

Zurück zu INV-KNX SMA Benutzerhandbuch