Zum Inhalt springen
Elausys

KNX-Gateways für Wechselrichter / INV-KNX SMA Benutzerhandbuch

Hardware und Kompatibilität

Anschlusspläne, Frontpanel-Anzeigen und Kompatibilitätsgrenzen für INV-KNX SMA.

elausys · 11 September 2026
Auf dieser Seite

The gateway connects the SMA inverter over Ethernet and publishes its measurements on KNX. It provides galvanic isolation from the KNX bus and mounts on a DIN rail in a 2-module space.

inv-knx-connections.png

Connection arrangement: KNX at the top; 12-30 VDC auxiliary supply and RJ45 Ethernet at the bottom.

Front panel elementMeaning
Network green LEDPhysical Ethernet connection established.
Connected green LEDCommunication with the inverter established.
P buttonKNX programming mode button.
Red LEDKNX programming status.

Choose the SMA profile

ETS inverter modelGateway Unit IdUse
23 SMA native profile3Default for new installations. Required for Sunny Tripower Smart Energy hybrid models STP5.0 / 6.0 / 8.0 / 10.0-3SE-40 and full battery or grid-meter data.
1 SunSpec profile126Legacy inverters without the SMA native profile, or installations without battery and without power meter.

The model and Unit Id must match. For model 1, set the inverter Unit ID to 3; the gateway uses 126 because the SunSpec address has an offset of +123.

SMA application limits: only PV circuits 1 and 2 apply. Battery 2 is not used. Model 23 provides reactive power, daily yield, battery power, battery lifetime energy counters and grid power. See the object tables for the complete availability list.

Manual navigation

All chapters of the INV-KNX SMA user manual

Häufig gestellte Fragen

Wo befinden sich die Anschlüsse des Gateways?

Der KNX-Busanschluss befindet sich oben. Hilfsversorgung und Ethernetanschluss befinden sich unten.

Was ist der Unterschied zwischen Network und Connected?

Network zeigt eine physikalische Ethernetverbindung. Connected zeigt die Kommunikation mit dem Wechselrichter.

Wie unterscheiden sich die SMA-Profile?

Verwenden Sie Modell 23 mit Gateway Unit Id 3 für neue Installationen. Das SunSpec-Profil verwendet Modell 1 mit Unit Id 126 und Wechselrichter-ID 3.

Weiter erkunden

Finden Sie die weiteren Anleitungen zu diesem Produkt in der Dokumentation.

Zurück zu INV-KNX SMA Benutzerhandbuch