Μετάβαση στο περιεχόμενο
Elausys

KNX Πύλες για Inverters / Εγχειρίδιο χρήσης INV-KNX SMA

Firmware και τεχνικά δεδομένα

Υποστηριζόμενο firmware, διαδικασία ενημέρωσης και ηλεκτρικά και εγκαταστασιακά χαρακτηριστικά του INV-KNX SMA.

elausys · 19 Σεπτεμβρίου 2026
Σε αυτή τη σελίδα

Firmware version and update

This manual and the related ETS application apply to firmware V3.2.3.1 and above. Read the firmware version in the top-right corner of the gateway webpage or read GO 2 in ETS.

If Elausys provides updated firmware for this device, open FW Update on the gateway webpage, select the supplied binary file and press Update. After updating, read the firmware version again and repeat the communication and measurement checks in Section 7.

Technical data

SpecificationValue
Auxiliary supply12-30 VDC / GND, screw terminal
KNX bus current< 16 mA at 29 VDC, typical
Operating temperature+5 °C to +45 °C
Enclosure width2 space units (2 modules)
MountingDIN rail
KNX terminalPluggable red/black micro terminal, 4-pole PUSH WIRE; solid conductor wire 0.6-0.8 mm² as stated in the source
KNX bus voltage29 VDC

Product information and support: elausys.com. Related document: KNX Logic Module User Manual. SMA configuration reference: Sunny Explorer user manual or the manual for the installed inverter.

Manual navigation

All chapters of the INV-KNX SMA user manual

Συχνές ερωτήσεις

Για ποιο firmware της πύλης ισχύει αυτό το εγχειρίδιο;

Αυτό το εγχειρίδιο και η σχετική εφαρμογή ETS ισχύουν για firmware V3.2.3.1 και νεότερο.

Πού μπορώ να δω την εγκατεστημένη έκδοση firmware;

Ανοίξτε την ιστοσελίδα της πύλης. Η εγκατεστημένη έκδοση firmware εμφανίζεται επάνω δεξιά.

Πώς εγκαθιστώ το firmware που παρέχεται για την πύλη;

Ανοίξτε το FW Update στην ιστοσελίδα της πύλης, επιλέξτε το παρεχόμενο δυαδικό αρχείο και πατήστε Update.

Συνεχίστε την εξερεύνηση

Βρείτε τους υπόλοιπους οδηγούς για αυτό το προϊόν στην τεκμηρίωση.

Επιστροφή στο Εγχειρίδιο χρήσης INV-KNX SMA