Μετάβαση στο περιεχόμενο
Elausys

KNX Πύλες για Inverters / Εγχειρίδιο χρήσης INV-KNX SMA

Υλικό και συμβατότητα

Διαγράμματα συνδέσεων, ενδείξεις του μπροστινού πάνελ και όρια συμβατότητας για το INV-KNX SMA.

elausys · 11 Σεπτεμβρίου 2026
Σε αυτή τη σελίδα

The gateway connects the SMA inverter over Ethernet and publishes its measurements on KNX. It provides galvanic isolation from the KNX bus and mounts on a DIN rail in a 2-module space.

inv-knx-connections.png

Connection arrangement: KNX at the top; 12-30 VDC auxiliary supply and RJ45 Ethernet at the bottom.

Front panel elementMeaning
Network green LEDPhysical Ethernet connection established.
Connected green LEDCommunication with the inverter established.
P buttonKNX programming mode button.
Red LEDKNX programming status.

Choose the SMA profile

ETS inverter modelGateway Unit IdUse
23 SMA native profile3Default for new installations. Required for Sunny Tripower Smart Energy hybrid models STP5.0 / 6.0 / 8.0 / 10.0-3SE-40 and full battery or grid-meter data.
1 SunSpec profile126Legacy inverters without the SMA native profile, or installations without battery and without power meter.

The model and Unit Id must match. For model 1, set the inverter Unit ID to 3; the gateway uses 126 because the SunSpec address has an offset of +123.

SMA application limits: only PV circuits 1 and 2 apply. Battery 2 is not used. Model 23 provides reactive power, daily yield, battery power, battery lifetime energy counters and grid power. See the object tables for the complete availability list.

Manual navigation

All chapters of the INV-KNX SMA user manual

Συχνές ερωτήσεις

Πού βρίσκονται οι συνδέσεις της πύλης;

Η σύνδεση του bus KNX βρίσκεται στο επάνω μέρος. Η βοηθητική τροφοδοσία και το Ethernet βρίσκονται στο κάτω μέρος.

Ποια είναι η διαφορά μεταξύ Network και Connected;

Το Network υποδεικνύει φυσική σύνδεση Ethernet. Το Connected υποδεικνύει επικοινωνία με τον μετατροπέα.

Πώς διαφέρουν τα προφίλ SMA;

Χρησιμοποιήστε το μοντέλο 23 με Unit Id πύλης 3 για νέες εγκαταστάσεις. Το προφίλ SunSpec χρησιμοποιεί μοντέλο 1 με Unit Id 126 και ID μετατροπέα 3.

Συνεχίστε την εξερεύνηση

Βρείτε τους υπόλοιπους οδηγούς για αυτό το προϊόν στην τεκμηρίωση.

Επιστροφή στο Εγχειρίδιο χρήσης INV-KNX SMA