Passer au contenu
Elausys

Passerelles KNX pour onduleurs / Manuel d'utilisation INV-KNX SMA

Firmware et données techniques

Firmware applicable, procédure de mise à jour et caractéristiques électriques et d'installation de l'INV-KNX SMA.

elausys · 19 septembre 2026
Sur cette page

Firmware version and update

This manual and the related ETS application apply to firmware V3.2.3.1 and above. Read the firmware version in the top-right corner of the gateway webpage or read GO 2 in ETS.

If Elausys provides updated firmware for this device, open FW Update on the gateway webpage, select the supplied binary file and press Update. After updating, read the firmware version again and repeat the communication and measurement checks in Section 7.

Technical data

SpecificationValue
Auxiliary supply12-30 VDC / GND, screw terminal
KNX bus current< 16 mA at 29 VDC, typical
Operating temperature+5 °C to +45 °C
Enclosure width2 space units (2 modules)
MountingDIN rail
KNX terminalPluggable red/black micro terminal, 4-pole PUSH WIRE; solid conductor wire 0.6-0.8 mm² as stated in the source
KNX bus voltage29 VDC

Product information and support: elausys.com. Related document: KNX Logic Module User Manual. SMA configuration reference: Sunny Explorer user manual or the manual for the installed inverter.

Manual navigation

All chapters of the INV-KNX SMA user manual

Questions fréquentes

À quel firmware du gateway ce manuel s'applique-t-il ?

Ce manuel et l'application ETS associée s'appliquent au firmware V3.2.3.1 et aux versions ultérieures.

Où puis-je lire la version du firmware installée ?

Ouvrez la page web du gateway. La version du firmware installé apparaît dans l'angle supérieur droit.

Comment installer le firmware fourni pour le gateway ?

Ouvrez FW Update sur la page web du gateway, sélectionnez le fichier binaire fourni et appuyez sur Update.

Continuer l'exploration

Retrouvez les autres guides de ce produit dans la documentation.

Retour à Manuel d'utilisation INV-KNX SMA