Passer au contenu
Elausys

Passerelles KNX pour onduleurs / Manuel d'utilisation INV-KNX SMA

Matériel et compatibilité

Schémas de raccordement, voyants du panneau avant et limites de compatibilité pour INV-KNX SMA.

elausys · 11 septembre 2026
Sur cette page

The gateway connects the SMA inverter over Ethernet and publishes its measurements on KNX. It provides galvanic isolation from the KNX bus and mounts on a DIN rail in a 2-module space.

inv-knx-connections.png

Connection arrangement: KNX at the top; 12-30 VDC auxiliary supply and RJ45 Ethernet at the bottom.

Front panel elementMeaning
Network green LEDPhysical Ethernet connection established.
Connected green LEDCommunication with the inverter established.
P buttonKNX programming mode button.
Red LEDKNX programming status.

Choose the SMA profile

ETS inverter modelGateway Unit IdUse
23 SMA native profile3Default for new installations. Required for Sunny Tripower Smart Energy hybrid models STP5.0 / 6.0 / 8.0 / 10.0-3SE-40 and full battery or grid-meter data.
1 SunSpec profile126Legacy inverters without the SMA native profile, or installations without battery and without power meter.

The model and Unit Id must match. For model 1, set the inverter Unit ID to 3; the gateway uses 126 because the SunSpec address has an offset of +123.

SMA application limits: only PV circuits 1 and 2 apply. Battery 2 is not used. Model 23 provides reactive power, daily yield, battery power, battery lifetime energy counters and grid power. See the object tables for the complete availability list.

Manual navigation

All chapters of the INV-KNX SMA user manual

Questions fréquentes

Où se trouvent les raccordements de la passerelle ?

Le raccordement du bus KNX se trouve en haut. L'alimentation auxiliaire et Ethernet se trouvent en bas.

Quelle est la différence entre Network et Connected ?

Network indique une connexion Ethernet physique. Connected indique la communication avec l'onduleur.

Comment les profils SMA diffèrent-ils ?

Utilisez le modèle 23 avec Unit Id 3 pour les nouvelles installations. Le profil SunSpec utilise le modèle 1 avec Unit Id 126 et l'ID onduleur 3.

Continuer l'exploration

Retrouvez les autres guides de ce produit dans la documentation.

Retour à Manuel d'utilisation INV-KNX SMA