Vai al contenuto
Elausys

Gateway KNX per Inverter / Manuale utente INV-KNX Fronius

Riferimento dei parametri ETS

Tabella completa dei parametri ETS e indicazioni specifiche per l'applicazione INV-KNX Fronius.

elausys · 14 settembre 2026
In questa pagina

These parameters are in the device Parameters tab. Apply the settings and availability limits for this inverter family.

ParameterValuesFronius configuration guidance
AC NetworkSingle phase (default) Tri-PhaseType of AC network
Number of PV Circuits1 … 4NOT APPLICABLE for this type of inverters
Inverter model0…2553 = Fronius Inverters (Gen24,…) 6 = Fronius Symo Hybrid
Refresh rate (min)0…255Cyclic rate of data polling from the inverter.
Battery 1Not Used / UsedDisplay group objects to monitor the status of battery 1
Battery 2Not Used / UsedDisplay group objects to monitor the status of battery 2 (NOT USED for this inverter)
PowermeterNot Used / UsedDisplay group objects to monitor the powermeter value
TimezoneUTC-11… UTC+14Timezone where the device is installed. It is used for logic functions based on the weekly calendar.
Daylight saving timeNot Used / UsedSet if daylight saving is used where the device is installed. It is used for logic functions based on the weekly calendar.
Device OptionsText stringFronius Smart meter modbus ID (if available)

Impostazioni dell'applicazione

Set Device Options to the Fronius Smart Meter Modbus ID when a meter is installed; check the actual ID (default 200 or 240).

An enabled object does not make an unsupported measurement available. Check the complete object reference in Section 8.

Intervallo di interrogazione

Allow the configured polling interval before checking that measurements update. Choose the interval required for the KNX project.

Tutti i capitoli del manuale INV-KNX Fronius

Domande frequenti

Quale modello di inverter devo selezionare?

Seleziona il modello 3 per gli inverter Fronius, incluso Gen24, oppure il modello 6 per Fronius Symo Hybrid.

Che cosa devo inserire in Device Options?

Inserisci l'ID Modbus del Fronius Smart Meter quando è installato un contatore. Verifica l'ID effettivo nella configurazione dell'inverter; i valori predefiniti documentati sono 200 o 240.

L'attivazione di un oggetto opzionale garantisce una misura?

No. Il modello di inverter selezionato e l'apparecchiatura installata devono fornire la misura. Consulta la tabella di disponibilità degli oggetti di comunicazione.

Continua a esplorare

Trova le altre guide per questo prodotto nella documentazione.

Torna a Manuale utente INV-KNX Fronius