Naar de inhoud
Elausys

KNX Gateways voor Omvormers / INV-KNX Huawei gebruikershandleiding

Referentie communicatieobjecten

De volledige referentie van de communicatieobjecten voor INV-KNX Huawei, inclusief gegevenstypen en niet-beschikbare waarden.

elausys · 16 september 2026
Op deze pagina

8.1 AC- en PV-waarden van het systeem

Alle vermelde objecten gebruiken de vlaggen C R - T -: Communicatie, Lezen en Verzenden ingeschakeld; Schrijven en Bijwerken uitgeschakeld. Functie: actuele waarde, behalve GO 1 (statuscode), GO 2 (tekststring) en GO 34-39 (statuscode).

GOObject nameSizeDPT and typeMeaning and availability
1Module status1 byte20.011
DPT_ErrorClass_SystemSends 0 when the module is operating normally, sends an error code when applicable.
2Firmware version14 bytes16.000
Character stringReturns the firmware version of the device when the object is read.
3AC Current4 bytes14.019
Electric current (A)AC Total Current value
4AC Current A4 bytes14.019
Electric current (A)AC Current phase A
5AC Current B4 bytes14.019
Electric current (A)AC Current phase B
6AC Current C4 bytes14.019
Electric current (A)AC Current phase C
7AC Voltage4 bytes14.027
Electric potential (V)AC Total Voltage
8AC Voltage AB4 bytes14.027
Electric potential (V)AC Voltage phase AB
9AC Voltage BC4 bytes14.027
Electric potential (V)AC Voltage phase BC
10AC Voltage CA4 bytes14.027
Electric potential (V)AC Voltage phase CA
11AC Voltage AN4 bytes14.027
Electric potential (V)AC Voltage phase AN
12AC Voltage BN4 bytes14.027
Electric potential (V)AC Voltage phase BN
13AC Voltage CN4 bytes14.027
Electric potential (V)AC Voltage phase CN
14DC Current4 bytes14.019
Electric current (A)DC Total Current value (NOT USED)
15DC Voltage4 bytes14.027
Electric potential (V)DC Total Voltage (NOT USED)
16PV1 Voltage4 bytes14.027
Electric potential (V)PV1 Voltage
17PV1 Current4 bytes14.019
Electric current (A)PV1 Current
18PV2 Voltage4 bytes14.027
Electric potential (V)PV2 Voltage
19PV2 Current4 bytes14.019
Electric current (A)PV2 Current

8.2 Vermogen, energie en diagnose

All listed objects use flags C R - T -: Communication, Read and Transmit enabled; Write and Update disabled. Function: Actual value, except GO 1 (Status code), GO 2 (Text String) and GO 34-39 (Status code).

GOObject nameSizeDPT and typeMeaning and availability
20PV3 Voltage4 bytes14.027
Electric potential (V)PV3 Voltage
21PV3 Current4 bytes14.019
Electric current (A)PV3 Current
22PV4 Voltage4 bytes14.027
Electric potential (V)PV4 Voltage
23PV4 Current4 bytes14.019
Electric current (A)PV4 Current
24AC Power4 bytes14.056
Power (W)AC Power
25DC Power4 bytes14.056
Power (W)DC Power
26AC Frequency4 bytes14.033
Frequency (Hz)AC Frequency
27AC VA4 bytes14.056
Power (W)AC Apparent power (NOT USED)
28AC VAR4 bytes14.056
Power (W)AC Reactive power (NOT USED)
29AC PF4 bytes14.057
Power factor (cos phi)Power factor
30AC Energy4 bytes13.013
Active energy (kWh)Total AC Energy
31Efficiency2 bytes8.010
Percentage (%)Inverter efficiency
32Insulation4 bytes14.056
Resistance (Ohm)Insulation resistance
33Temperature2 bytes9.001
Temperature (°C)Cabinet temperature
34Status 12 bytes-
  • | Device specific status code | | 35 | Status 2 | 2 bytes | -
  • | Device specific status code | | 36 | Status 3 | 2 bytes | -
  • | Device specific status code | | 37 | Status 4 | 2 bytes | -
  • | Device specific status code | | 38 | Status 5 | 2 bytes | -
  • | Device specific status code | | 39 | Status 6 | 2 bytes | -
  • | Device specific status code | | 40 | Daily Energy Yield | 4 bytes | 13.013 Energy (kWh) | Daily Energy Yield |

8.3 Batterij- en netwaarden

All listed objects use flags C R - T -: Communication, Read and Transmit enabled; Write and Update disabled. Function: Actual value, except GO 1 (Status code), GO 2 (Text String) and GO 34-39 (Status code).

GOObject nameSizeDPT and typeMeaning and availability
41Battery 1 Running Status2 bytes-
  • | 0: offline 2: standby 3: running 4: fault 5: sleep mode | | 42 | Battery 1 power | 4 bytes | 14.056 Power (W) | > 0: charging < 0: discharging | | 43 | Battery 1 SOC | 1 byte | 5.001 Percentage (%) | Battery's state of capacity | | 44 | Battery 1 current day charge | 4 bytes | 13.013 Energy (kWh) | Battery 1 current day charge | | 45 | Battery 1 current day discharge | 4 bytes | 13.013 Energy (kWh) | Battery 1 current day discharge | | 46 | Battery 1 total charge | 4 bytes | 13.013 Energy (kWh) | Battery 1 total charge | | 47 | Battery 1 total discharge | 4 bytes | 13.013 Energy (kWh) | Battery 1 total discharge | | 48 | Battery 2 Running Status | 2 bytes | -
  • | 0: offline 2: standby 3: running 4: fault 5: sleep mode | | 49 | Battery 2 power | 4 bytes | 14.056 Power (W) | > 0: charging < 0: discharging | | 50 | Battery 2 SOC | 1 byte | 5.001 Percentage (%) | Battery's state of capacity | | 51 | Battery 2 current day charge | 4 bytes | 13.013 Energy (kWh) | Battery 2 current day charge | | 52 | Battery 2 current day discharge | 4 bytes | 13.013 Energy (kWh) | Battery 2 current day discharge | | 53 | Battery 2 total charge | 4 bytes | 13.013 Energy (kWh) | Battery 2 total charge | | 54 | Battery 2 total discharge | 4 bytes | 13.013 Energy (kWh) | Battery 2 total discharge | | 55 | Powermeter | 4 bytes | 14.056 Power (W) | > 0: charging < 0: discharging |

Schakel de overeenkomstige apparatuurparameters in ETS in. Een streepje in de DPT-kolom geeft aan dat geen standaardgegevenstype is opgegeven. NOT USED-items blijven onbeschikbaar.

EMMA communication objects

8.4 Beschikbaarheid en betekenis van EMMA

Voor model 21 worden de volgende metingen van de omvormer voor EMMA vermeld. GO 27 blijft NOT USED. Grootten, gegevenstypen en vlaggen staan in de secties 8.1-8.3; GO 1 en GO 2 zijn de algemene apparaatobjecten.

GOObject nameEMMA meaning and availability
4AC Current AAC Current phase A
5AC Current BAC Current phase B
6AC Current CAC Current phase C
8AC Voltage ABAC Voltage phase AB
9AC Voltage BCAC Voltage phase BC
10AC Voltage CAAC Voltage phase CA
11AC Voltage ANAC Voltage phase AN
12AC Voltage BNAC Voltage phase BN
13AC Voltage CNAC Voltage phase CN
24AC PowerAC Power
25DC PowerDC Power
27AC VAAC Apparent power (NOT USED)
29AC PFPower factor
30AC EnergyTotal AC Energy
40Daily Energy Yield
42Battery 1 power> 0: charging < 0: discharging
43Battery 1 SOCBattery's state of capacity
44Battery 1 current day charge
45Battery 1 current day discharge
46Battery 1 total charge
47Battery 1 total discharge
55Powermeter< 0: charging > 0: discharging

All chapters of the INV-KNX Huawei user manual

Veelgestelde vragen

Kunnen deze meetobjecten vanuit KNX worden geschreven?

De vermelde objecten gebruiken de vlaggen C R - T -: Communicatie, Lezen en Verzenden ingeschakeld; Schrijven en Bijwerken uitgeschakeld.

Wat betekent NOT USED in de objectreferentie?

De meting is niet beschikbaar voor deze toepassing. Dat ze in de algemene ETS-toepassing voorkomt, betekent niet dat de omvormer ze levert.

Wat betekent een streepje in de kolom datatype?

Voor die invoer in deze toepassingsreferentie is geen standaard Type ID of Type Name opgegeven. Gebruik de objectgrootte en de gedocumenteerde betekenis naast de ETS-toepassing.

Verder verkennen

Vind de andere handleidingen voor dit product in de documentatie.

Terug naar INV-KNX Huawei gebruikershandleiding