Naar de inhoud
Elausys

KNX Gateways voor Omvormers / INV-KNX SMA Gebruikershandleiding

Firmware en technische gegevens

Toepasselijk firmware, de updateprocedure en elektrische en installatiegegevens voor INV-KNX SMA.

elausys · 19 september 2026
Op deze pagina

Firmware version and update

This manual and the related ETS application apply to firmware V3.2.3.1 and above. Read the firmware version in the top-right corner of the gateway webpage or read GO 2 in ETS.

If Elausys provides updated firmware for this device, open FW Update on the gateway webpage, select the supplied binary file and press Update. After updating, read the firmware version again and repeat the communication and measurement checks in Section 7.

Technical data

SpecificationValue
Auxiliary supply12-30 VDC / GND, screw terminal
KNX bus current< 16 mA at 29 VDC, typical
Operating temperature+5 °C to +45 °C
Enclosure width2 space units (2 modules)
MountingDIN rail
KNX terminalPluggable red/black micro terminal, 4-pole PUSH WIRE; solid conductor wire 0.6-0.8 mm² as stated in the source
KNX bus voltage29 VDC

Product information and support: elausys.com. Related document: KNX Logic Module User Manual. SMA configuration reference: Sunny Explorer user manual or the manual for the installed inverter.

Manual navigation

All chapters of the INV-KNX SMA user manual

Veelgestelde vragen

Op welke gatewayfirmware is deze handleiding van toepassing?

Deze handleiding en de bijbehorende ETS-applicatie zijn van toepassing op firmware V3.2.3.1 en hoger.

Waar kan ik de geïnstalleerde firmwareversie lezen?

Open de webpagina van de gateway. De geïnstalleerde firmwareversie staat rechtsboven.

Hoe installeer ik firmware die voor de gateway is geleverd?

Open FW Update op de webpagina van de gateway, selecteer het meegeleverde binaire bestand en klik op Update.

Verder verkennen

Vind de andere handleidingen voor dit product in de documentatie.

Terug naar INV-KNX SMA Gebruikershandleiding