Naar de inhoud
Elausys

KNX Gateways voor Omvormers / INV-KNX SMA Gebruikershandleiding

Hardware en compatibiliteit

Aansluitschema's, indicatoren op het frontpaneel en compatibiliteitslimieten voor INV-KNX SMA.

elausys · 11 september 2026
Op deze pagina

The gateway connects the SMA inverter over Ethernet and publishes its measurements on KNX. It provides galvanic isolation from the KNX bus and mounts on a DIN rail in a 2-module space.

inv-knx-connections.png

Connection arrangement: KNX at the top; 12-30 VDC auxiliary supply and RJ45 Ethernet at the bottom.

Front panel elementMeaning
Network green LEDPhysical Ethernet connection established.
Connected green LEDCommunication with the inverter established.
P buttonKNX programming mode button.
Red LEDKNX programming status.

Choose the SMA profile

ETS inverter modelGateway Unit IdUse
23 SMA native profile3Default for new installations. Required for Sunny Tripower Smart Energy hybrid models STP5.0 / 6.0 / 8.0 / 10.0-3SE-40 and full battery or grid-meter data.
1 SunSpec profile126Legacy inverters without the SMA native profile, or installations without battery and without power meter.

The model and Unit Id must match. For model 1, set the inverter Unit ID to 3; the gateway uses 126 because the SunSpec address has an offset of +123.

SMA application limits: only PV circuits 1 and 2 apply. Battery 2 is not used. Model 23 provides reactive power, daily yield, battery power, battery lifetime energy counters and grid power. See the object tables for the complete availability list.

Manual navigation

All chapters of the INV-KNX SMA user manual

Veelgestelde vragen

Waar bevinden de aansluitingen van de gateway zich?

De KNX-busaansluiting bevindt zich bovenaan. De hulpvoeding en Ethernetverbinding bevinden zich onderaan.

Wat is het verschil tussen Network en Connected?

Network geeft een fysieke Ethernetverbinding aan. Connected geeft communicatie met de omvormer aan.

Wat is het verschil tussen de SMA-profielen?

Gebruik model 23 met gateway Unit Id 3 voor nieuwe installaties. Het SunSpec-profiel gebruikt model 1 met Unit Id 126 en omvormer-ID 3.

Verder verkennen

Vind de andere handleidingen voor dit product in de documentatie.

Terug naar INV-KNX SMA Gebruikershandleiding