Saltar al contenido
Elausys

Puertas KNX para Inversores / Manual de usuario INV-KNX SMA

Descripción general

Finalidad de la pasarela, instalaciones SMA compatibles y requisitos antes de la puesta en marcha.

elausys · 09 septiembre 2026
En esta página

The INV-KNX gateway connects SMA solar inverters to a KNX installation. It reads inverter data over Ethernet using Modbus TCP and publishes the measurements as native KNX communication objects.

Integrators can use these values for energy monitoring, trends and project-specific automation, including actions based on solar production, battery operation and grid exchange.

Supported SMA installations

The gateway supports SMA Sunny Boy, Sunny Tripower and Sunny Tripower Smart Energy inverters that provide the required SMA native Modbus profile or SunSpec Modbus interface. Connect the inverter and gateway to the same router/network.

Model 23 with gateway Unit Id 3 is the default for new installations and provides full battery and grid-meter data where the connected equipment supports it. Model 1 with Unit Id 126 provides the legacy SunSpec option. Section 3 explains the model selection and application limits.

Main capabilities

  • Monitoring of energy, power, current, voltage, frequency, temperature and available battery or meter values.
  • Configurable polling interval for inverter data.
  • KNX bus isolation and compact DIN-rail installation.
  • Local logic functions including gates, sequences, triggers, mathematical operations and weekly calendar events.

Configuration and requirements

Configure network and Modbus communication through the gateway webpage. Use ETS to assign the KNX physical address, set the application parameters and link group addresses. An auxiliary 12-30 VDC supply is required.

This manual and the related ETS application apply to firmware V3.2.3.1 and above. The SMA application supports PV circuits 1 and 2 and Battery 1 where fitted; PV circuits 3 and 4 and Battery 2 are not used.

Before commissioning

Identify the inverter model and IP address, confirm the available battery and metering equipment, and prepare the ETS project and network settings. Continue with the quick commissioning procedure in Chapter 2.

Manual navigation

All chapters of the INV-KNX SMA user manual

Preguntas frecuentes

¿Qué hace la pasarela INV-KNX?

Conecta las instalaciones de inversores SMA compatibles con KNX mediante Modbus TCP y ofrece sus mediciones como objetos de comunicación KNX.

¿Cómo se configura la pasarela?

Use la página web de la pasarela para la red y la comunicación Modbus. Use ETS para la dirección física, los parámetros de la aplicación y las asociaciones de direcciones de grupo.

¿Qué firmware de la pasarela cubre este manual?

Este manual y su aplicación ETS se aplican al firmware V3.2.3.1 y posteriores. El modelo de inversor y el equipo instalado también determinan las medidas disponibles.

Seguir explorando

Encuentre las demás guías de este producto en la documentación.

Volver a Manual de usuario INV-KNX SMA