De INV-KNX-gateway verbindt SolarEdge-zonneomvormers met een KNX-installatie. De gateway wisselt omvormergegevens uit via het lokale netwerk met Modbus TCP en publiceert metingen als native KNX-communicatieobjecten.
Gebruik de gegevens voor energiemonitoring, trends en projectspecifieke automatisering, waaronder acties op basis van zonneproductie, batterijwerking en netuitwisseling wanneer deze waarden beschikbaar zijn.
Ondersteunde installaties
Requires a SunSpec-compatible SolarEdge inverter. SetApp models are supported; LCD models require firmware 3.xxxx or later.
Belangrijkste mogelijkheden
- Monitoring of energy, power, current, voltage, frequency, temperature and available battery or meter values.
- Configurable refresh rate, Ethernet connection and galvanic isolation from the KNX bus.
- DIN-rail mounting and a 12-30 VDC auxiliary power supply.
- Local logic gates, sequences, triggers, mathematical operations and weekly calendar events.
Configuratie en vereisten
Use the gateway webpage to configure network communication and ETS to assign the physical address, application parameters and group addresses. This manual and its ETS application apply to firmware V3.2.3.1 and above.
Check inverter compatibility and connected equipment in Section 3. Available measurements depend on the model and equipment; use the availability information in Section 8 before designing the KNX application.
Vóór de inbedrijfstelling
Prepare the inverter communication settings, a suitable fixed gateway IP address, the ETS project and access to the inverter configuration. Continue with the quick commissioning procedure in Chapter 2.