Saltar para o conteúdo
Elausys

Portas KNX para Inversores / Manual do Utilizador INV-KNX SMA

Firmware e dados técnicos

Firmware aplicável, procedimento de atualização e especificações elétricas e de instalação do INV-KNX SMA.

elausys · 19 setembro 2026
Nesta página

Firmware version and update

This manual and the related ETS application apply to firmware V3.2.3.1 and above. Read the firmware version in the top-right corner of the gateway webpage or read GO 2 in ETS.

If Elausys provides updated firmware for this device, open FW Update on the gateway webpage, select the supplied binary file and press Update. After updating, read the firmware version again and repeat the communication and measurement checks in Section 7.

Technical data

SpecificationValue
Auxiliary supply12-30 VDC / GND, screw terminal
KNX bus current< 16 mA at 29 VDC, typical
Operating temperature+5 °C to +45 °C
Enclosure width2 space units (2 modules)
MountingDIN rail
KNX terminalPluggable red/black micro terminal, 4-pole PUSH WIRE; solid conductor wire 0.6-0.8 mm² as stated in the source
KNX bus voltage29 VDC

Product information and support: elausys.com. Related document: KNX Logic Module User Manual. SMA configuration reference: Sunny Explorer user manual or the manual for the installed inverter.

Manual navigation

All chapters of the INV-KNX SMA user manual

Perguntas frequentes

A que firmware da gateway se aplica este manual?

Este manual e a aplicação ETS relacionada aplicam-se ao firmware V3.2.3.1 e posteriores.

Onde posso ler a versão de firmware instalada?

Abra a página web da gateway. A versão do firmware instalado aparece no canto superior direito.

Como instalo o firmware fornecido para a gateway?

Abra FW Update na página web da gateway, selecione o ficheiro binário fornecido e prima Update.

Continuar a explorar

Encontre os outros guias deste produto na documentação.

Voltar a Manual do Utilizador INV-KNX SMA