ELAUSYS / HV-TOUCH-10
HyperVisu KNX Touch Panel 10-inch
The HV-TOUCH-10 is a 10-inch wall-mounted touch panel for central control of your HyperVisu installation. The native app is preinstalled on its 1280 × 800 capacitive display. Power over Ethernet carries power and network in one cable. A HyperVisu HOME, PRO, or MAX server is required.
The product
Designed for your installation.
Central building control on a 10-inch touch panel
The HV-TOUCH-10 provides a dedicated wall interface for your HyperVisu installation. Its 10-inch, 1280 × 800 capacitive touch display runs the native HyperVisu app, which is preinstalled on the panel.
The 10-inch display provides space for room overviews, favourites, and energy dashboards. Use it at a central location to access the functions configured on your HyperVisu server.
Control and monitor connected systems
Access lighting, blinds, heating, and scenes through the project configured on the server. Rooms, favourites, and personal Views help organise the controls you use most.
Supported integrations can also provide energy measurements, alarm functions, cameras, video door entry, and audio controls. Available functions depend on the server configuration, connected equipment, and integration support.
The panel provides an interface to the server. It does not replace the HyperVisu server or connect directly to the KNX bus.
Designed for wall-mounted use
A proximity sensor wakes the screen when you approach within its specified 80 mm range. Screen Economy provides a sleep mode when the display is not in use.
The panel includes four microphones and two 1 W speakers. Audio use depends on the supported application and integration.
The panel measures 240 × 160 × 11 mm without its base and includes a wall mount. Its metal frame is intended for indoor installation. The specified operating range is 0 to +40 °C, with humidity up to 90 % RH and an IP50 rating.
Installation and server connection
Connect the panel to a suitable PoE network connection. The same Ethernet cable provides power and access to the local network.
A commissioned HyperVisu HOME, PRO, or MAX server must be reachable on that network. For KNX installations, the server communicates with the bus through a compatible KNX/IP interface or router.
The project and its device integrations are configured on the HyperVisu server, using its configuration tools or ElauPro. Connect the panel’s app to that server according to the setup instructions.
Local control of locally connected devices does not require a cloud service. Functions that rely on online integrations may require internet access. Panel operation depends on the server and network connection; switching off the panel does not stop the server or directly programmed KNX functions.
Specifications
- Reference
- HV-TOUCH-10
- Manufacturer
- ELAUSYS
| Parameter | Specification |
|---|---|
| Product reference | HV-TOUCH-10 |
| Product role | Wall-mounted client panel for HyperVisu |
| Display size | 10 inches |
| Resolution | 1280 × 800 pixels |
| Display / touch | TFT LCD; capacitive touch |
| Software | Native HyperVisu app preinstalled |
| Required server | HyperVisu HOME, PRO, or MAX |
| Network | Ethernet, RJ45 |
| Power supply | Power over Ethernet; alternative USB-C power input as documented |
| Proximity detection | Proximity sensor with 80 mm range |
| Display power management | Screen Economy sleep mode |
| Audio | 4 microphones; 2 × 1 W speakers |
| Mounting | Wall mount included |
| Model-specific hardware | Metal frame; 240 × 160 × 11 mm without base |
| KNX connection | Through the HyperVisu server and an external KNX/IP interface or router |
| Configuration | Project on the HyperVisu server; panel app connects to the commissioned server |
Key features
- 10-inch 1280 × 800 capacitive touch display
- Native HyperVisu app preinstalled
- Access building controls and dashboards from a central location
- Power and network through one PoE connection
- Proximity wake-up and Screen Economy sleep mode
- 4 microphones and two 1 W speakers
- 11 mm metal frame with wall mount included
- Requires a HyperVisu HOME, PRO, or MAX server
Documents & support
PDFHyperVisu Touch DatasheetProduct document · Opens in a new tabBrowse product supportFAQ
Frequently Asked Questions
Does it work without a HyperVisu server?
No. The panel is a client of a commissioned HyperVisu HOME, PRO, or MAX server. The server holds the project and communicates with the connected building systems.
Does the panel need a KNX bus connection?
No. It connects over Ethernet. The HyperVisu server communicates with KNX through a compatible KNX/IP interface or router.
Should I choose the 4-inch or 10-inch panel?
Choose HV-TOUCH-4 for compact room control at a doorway, bedside, or workspace. Choose HV-TOUCH-10 for a larger central interface with more space for controls and dashboards. Both use the HyperVisu app and can be combined in the same installation.
Is Power over Ethernet mandatory?
PoE is the intended installation method, carrying power and network over one cable. USB-C power is available as an alternative; follow the product documentation for the supported supply and connection requirements.
Can several panels connect to the same server?
Yes. You can combine HV-TOUCH-4 and HV-TOUCH-10 panels with supported phones and tablets connected to the same HyperVisu server.
Does it need internet access?
Local control of locally connected devices uses the local network and server. Online services used by an integration may require internet access.
Where is the panel configured?
Configure the building project and integrations on the HyperVisu server, using its configuration tools or ElauPro. The panel’s preinstalled app must then be connected to that server.
What happens if the server or network is unavailable?
The panel cannot control the installation through HyperVisu until the connection is restored. KNX functions programmed directly between KNX devices continue according to the ETS project.