Built for your installation
Elausys develops KNX devices that bring a building's systems onto the bus and control them from one installation. The range covers dedicated gateways for alarm panels and solar inverters, the MSA-810 modular actuator system, HyperVisu visualisation servers with their touch panels, and a 640 mA KNX power supply with an auxiliary 30 V output.
The gateways and actuators are configured in ETS with standard group objects, so they work alongside other manufacturers' KNX equipment. Choose a subcategory to compare models, or start from the page that matches your project.
See also:Integrating an alarm in KNXConnecting a solar inverter to KNXThe modular actuator systemHyperVisu KNX visualisation server
HyperVisu is a local KNX visualisation and automation server, available in HOME, PRO, and MAX variants. Control supported building systems from the native iOS or Android app, connect multiple protocols, and run automations on site. An external KNX/IP interface or router connects the server to KNX.
The HV-TOUCH-10 is a 10-inch wall-mounted touch panel for central control of your HyperVisu installation. The native app is preinstalled on its 1280 × 800 capacitive display. Power over Ethernet carries power and network in one cable. A HyperVisu HOME, PRO, or MAX server is required.
The HV-TOUCH-4 is a 4-inch wall-mounted touch panel for compact room control at an entrance, bedside, or workspace. The native HyperVisu app is preinstalled on its 480 × 480 capacitive display. Power over Ethernet carries power and network in one cable. A HyperVisu HOME, PRO, or MAX server is required.
The AJAX-KNX connects a compatible Ajax alarm hub to KNX. Monitor group states, power faults, and up to 96 zone statuses while armed over the local network. Optional arm, night-mode, and disarm commands require an Ajax cloud connection and internet access.
The INV-KNX-HU connects compatible Huawei solar inverters to your KNX installation via Modbus TCP. Bring solar production data—and battery and grid measurements where supported—into your KNX visualisation and automation, using a local network connection without a cloud service.
The JA-KNX connects compatible Jablotron alarm panels to KNX through the JA-121T RS485 module. Monitor up to 96 zones, view the status of four sections, and send arm, partial-arm, and disarm commands from your KNX installation.
The EVO-KNX connects compatible Paradox alarm panels to KNX through a PRT3 or BUS2SER serial module. Monitor up to 96 zones, view the status of four partitions, and send arm, partial-arm, and disarm commands from your KNX installation.
The NXG-KNX connects compatible Interlogix UltraSync alarm panels to KNX over the local Ethernet network. Monitor up to 96 zones, view the status of four areas, and send arm, partial-arm, and disarm commands from your KNX installation.
The MSA-810 is a KNX master actuator with eight 10 A relay outputs for switching or blind control. Add compatible extensions for heating, dimming, DALI, LED, and analogue control within one ETS application and KNX address. System capacity depends on the selected modules.
The SAE-2410 is a 24-channel switching extension for the MSA-810 KNX master actuator, with potential-free contacts rated at 10 A / 230 VAC per channel for resistive loads. It requires an MSA-810 master and is configured through the master’s ETS application.
The DATEC 1630.03160/61100 is a flush-mounted KNX actuator with four 10 A relay outputs for switching or blind control, eight dry-contact inputs and four status LED outputs. Use individual outputs for switching circuits or pair them to control up to two blinds or shutters.
The DATEC 1630.03160/62100 connects eight dry-contact inputs and eight status LEDs to KNX. Up to seven inputs can instead accept compatible temperature sensors. Its compact flush-mounted housing suits local push-button, switch and temperature interfaces in offices, hotel rooms and apartments.
Our team can help you choose the right products for your installation.