1 Prepare the host device
Commission the compatible host device using its own manual. Open its application parameters in ETS.
See General description
2 Add a logic extension
In the extensions section, select Logic Module 8-fold. A new tab provides eight logic channels. See Extension and channel configuration.
See Extension and channel configuration
3 Choose the channel function
Set Channel use to Logic gates, Sequence, Trigger or Math. Leave unused channels as Not used.
See Extension and channel configuration
4 Set parameters and datatypes
Configure inputs, output, conditions, send behaviour and delays using the relevant function section. For sequences, configure each required step. For calendar triggers, configure the host time settings and time source.
See Logic gates
5 Link group addresses and download
Link the required input, output and Block objects. Match the group-address datatypes to the selected function configuration and download the host application in ETS.
See Validation and troubleshooting
6 Validate the function
Use ETS Group Monitor to send representative inputs and check the output value, send condition and delay. Test the Block object and, where used, sequence timing or calendar conditions. See Validation and troubleshooting.
See Validation and troubleshooting