Which firmware does this application cover?

The manual and related ETS application apply to firmware V2.00 and above.

How can I read the installed firmware?

Read the Firmware communication object to obtain the version as a text string. The device also sends this object automatically at power-up.

This user manual and related ETS application is valid for firmware versions V2.00 and above.

A “Firmware” group object is available on the device to read the firmware version as a string. It is also automatically sent at power up.

TECHNICAL DATA	VALUE
Power supply	External 12VDC
Power consumption typ.	< 6 mA
Power consumption KNX bus typ.	< 4 mA @ 29VDC
Operating temperature	5 to + 45°C
Enclosure	None
Dimensions (W x D x H)	66 x 44 x 25mm
Mounting	4 screw holes for direct mounting in the Paradox control panel
KNX terminal	Pluggable micro terminal, Red/Black, 4 pole PUSH WIRE for solid conductor wire 0.6-0.8 mm²
12VDC input Terminal	Screw terminal 12VDC / GND
RS232 terminal	DB9 connector
Configurable output (PGM)	30
Configurable Virtual inputs	16
Configurable zone status	96
Configurable Areas	4
KNX bus voltage	29 VDC