Built for your installation
These gateways connect an intrusion alarm panel to KNX and expose its zones, states and supported commands as group objects in ETS. KNX can then react to the alarm: set back the heating when the building is armed, switch on lights during an alarm or show which zone triggered.
AJAX-KNX (Ajax Superior, Fibra and Baseline) and NXG-KNX (Interlogix UltraSync) connect over Ethernet. JA-KNX (Jablotron JA-100, with the JA-121T module), EVO-KNX (Paradox EVO, with the PRT3 module) and NX-KNX (GE NetworX/Caddx) use a serial link, and ANB-KNX monitors AnB Rimex TRICOM panels. Arming from KNX depends on the model and the panel settings; Ajax commands need the optional Ajax cloud connection, while status arrives locally. The gateway does not change the alarm's certification: choose and commission the panel with the alarm installer.
See also:Integrating an alarm in KNX
The AJAX-KNX connects a compatible Ajax alarm hub to KNX. Monitor group states, power faults, and up to 96 zone statuses while armed over the local network. Optional arm, night-mode, and disarm commands require an Ajax cloud connection and internet access.
The JA-KNX connects compatible Jablotron alarm panels to KNX through the JA-121T RS485 module. Monitor up to 96 zones, view the status of four sections, and send arm, partial-arm, and disarm commands from your KNX installation.
The EVO-KNX connects compatible Paradox alarm panels to KNX through a PRT3 or BUS2SER serial module. Monitor up to 96 zones, view the status of four partitions, and send arm, partial-arm, and disarm commands from your KNX installation.
The NXG-KNX connects compatible Interlogix UltraSync alarm panels to KNX over the local Ethernet network. Monitor up to 96 zones, view the status of four areas, and send arm, partial-arm, and disarm commands from your KNX installation.
The ANB-KNX connects AnB Rimex TRICOM alarm panels to KNX through RS485. Display up to 96 program-step statuses in your KNX visualisation and use them in building automation. This gateway provides monitoring only; it cannot arm or disarm the panel.
The NX-KNX connects compatible GE Interlogix NetworX (Caddx) alarm panels to KNX through the NX-584E RS232 module. Monitor up to 96 zones, view the status of four areas, and send arm, partial-arm, and disarm commands from your KNX installation.
Our team can help you choose the right products for your installation.