Firmware version and update
This user manual and related ETS application are valid for firmware versions V3.2.3.1 and above.
The firmware version can be read from the gateway web page using a web browser. It is displayed on the top right of the page.
In case an updated firmware is available, the device can be updated from the FW Update page. The binary file should be selected before pressing the Update button.
Technical data
| Specification | Value |
|---|---|
| Auxiliary power supply terminal | Screw terminal 12–30 VDC / GND |
| Power consumption KNX bus (typ.) | < 16 mA @ 29 VDC |
| Operating temperature | +5 °C to +45 °C |
| Enclosure dimensions (Space Units) | 2 SU |
| Mounting | DIN rail |
| KNX terminal | Pluggable micro terminal, Red/Black, 4-pole PUSH WIRE for solid conductor wire 0.6–0.8 mm² |
| KNX bus voltage | 29 VDC |
Product information and support: elausys.com. Related document: KNX Logic Module User Manual. Use the inverter manufacturer instructions for the installed model.