Built for your installation
Servers, touchscreens and gateways. Everything working together.
KNX Gateway for integration of Sigenergy's solar inverters on the KNX bus. The gateway is based on the Sigenergy Modbus TCP interface and is compatible with the SigenStor EC, Sigen Hybrid SP/TP and Sigen PV Max ranges.
Modbus TCP Gateway for integration of Ajax's intrusion systems in a building management system. The gateway is based on the Ajax monitoring-station Ethernet protocol and is compatible with the entire Ajax hub range (Superior, Fibra and Baseline lines).
KNX Gateway for integration of Ajax's intrusion systems on the KNX bus. The gateway is based on the Ajax monitoring-station Ethernet protocol and is compatible with the entire Ajax hub range (Superior, Fibra and Baseline lines).
4-inch touch panel for the HyperVisu visualisation server, fitting a standard EU / UK / UAE wall box in place of a bank of push-buttons. Runs the native HyperVisu app in its 4-inch layout on a 480 × 480 display, powered and connected over PoE, wakes on approach — room control for lights, blinds, climate and scenes. Requires a HyperVisu server (HVS-KNX).
10-inch wall-mounted touch panel for the HyperVisu visualisation server, running the native HyperVisu app on a 1280 × 800 display in an 11 mm metal frame. Powered and connected over PoE, wakes on approach, and gives the whole building — lights, blinds, climate, energy, security, cameras — from the hall or the reception desk. Requires a HyperVisu server (HVS-KNX).
Optional 2 SU DIN-rail enclosure for the Elausys JA-KNX and ANB-KNX gateway boards. Moves the gateway from the alarm panel to the electrical cabinet, with a front KNX bus connector and snap-on clips for 35 mm rail.
Jablotron JA-121T RS485 bus interface for JA-100 series panels, the required companion of the Elausys JA-KNX gateway. Provides the isolated RS485 link the gateway uses to read zones, sections and PG outputs and to arm, disarm and switch PGs from KNX.
Paradox PRT3 serial interface module for EVO and DGP panels, the required companion of the Elausys EVO-KNX gateway. Provides the RS232 ASCII link the gateway uses to read zones, partitions and PGMs and to write the 16 virtual inputs.
Pack of 10 connection bridges, 15 mm pitch, for the Elausys Universal KNX Actuator System. Links the phase terminals of consecutive channels on the wider terminals of the SAE-816 and HAE-805 so one circuit breaker feeds several outputs with a single incoming wire.
Pack of 10 connection bridges, 10 mm pitch, for the Elausys Universal KNX Actuator System. Links the phase terminals of consecutive channels on MSA-810, SAE-810 and SAE-2410 so one circuit breaker feeds several outputs with a single incoming wire.
HyperVisu visualisation server for KNX installations, available in three variants — HOME (2 GB RAM), PRO (4 GB) and MAX (8 GB). It runs on the customer's network, connects to the bus through a KNX/IP interface, speaks Modbus TCP, MQTT, BACnet/IP, HTTP, TCP/UDP and Sonos, hosts Home Assistant, Node-RED, Grafana and an MQTT broker alongside the visualisation, and is used from the native HyperVisu app on phone, tablet, 10-inch and 4-inch wall panels.
KNX Gateway for integration of SMA's solar inverters on the KNX bus. The gateway is based on the SMA SunSpec Modbus TCP interface and is compatible with the SMA Sunny Boy and Sunny Tripower inverter ranges.
Our team can help you choose the right products for your installation.