Built for your installation
Servers, touchscreens and gateways. Everything working together.
The INV-KNX-SIG connects compatible Sigenergy systems to your KNX installation via Modbus TCP. Bring power, export energy, and supported battery and grid measurements into your KNX visualisation and automation, using a local network connection without a cloud service.
The AJAX-MBTCP connects a compatible Ajax alarm hub to a Modbus TCP building management system. Monitor group states, power faults, and up to 96 zone statuses while armed over the local network. Optional arm, night-mode, and disarm commands require an Ajax cloud connection and internet access.
The AJAX-KNX connects a compatible Ajax alarm hub to KNX. Monitor group states, power faults, and up to 96 zone statuses while armed over the local network. Optional arm, night-mode, and disarm commands require an Ajax cloud connection and internet access.
The HV-TOUCH-4 is a 4-inch wall-mounted touch panel for compact room control at an entrance, bedside, or workspace. The native HyperVisu app is preinstalled on its 480 × 480 capacitive display. Power over Ethernet carries power and network in one cable. A HyperVisu HOME, PRO, or MAX server is required.
The HV-TOUCH-10 is a 10-inch wall-mounted touch panel for central control of your HyperVisu installation. The native app is preinstalled on its 1280 × 800 capacitive display. Power over Ethernet carries power and network in one cable. A HyperVisu HOME, PRO, or MAX server is required.
Optional 2 SU DIN-rail enclosure for the Elausys JA-KNX and ANB-KNX gateway boards. Moves the gateway from the alarm panel to the electrical cabinet, with a front KNX bus connector and snap-on clips for 35 mm rail.
Jablotron JA-121T RS485 bus interface for JA-100 series panels, the required companion of the Elausys JA-KNX gateway. Provides the isolated RS485 link the gateway uses to read zones, sections and PG outputs and to arm, disarm and switch PGs from KNX.
Paradox PRT3 serial interface module for EVO and DGP panels, the required companion of the Elausys EVO-KNX gateway. Provides the RS232 ASCII link the gateway uses to read zones, partitions and PGMs and to write the 16 virtual inputs.
Pack of 10 connection bridges, 15 mm pitch, for the Elausys Universal KNX Actuator System. Links the phase terminals of consecutive channels on the wider terminals of the SAE-816 and HAE-805 so one circuit breaker feeds several outputs with a single incoming wire.
Pack of 10 connection bridges, 10 mm pitch, for the Elausys Universal KNX Actuator System. Links the phase terminals of consecutive channels on MSA-810, SAE-810 and SAE-2410 so one circuit breaker feeds several outputs with a single incoming wire.
HyperVisu is a local KNX visualisation and automation server, available in HOME, PRO, and MAX variants. Control supported building systems from the native iOS or Android app, connect multiple protocols, and run automations on site. An external KNX/IP interface or router connects the server to KNX.
The INV-KNX-SMA connects compatible SMA solar inverters to your KNX installation via Modbus TCP. Bring solar production data—and battery and grid measurements where supported—into your KNX visualisation and automation, using a local network connection without a cloud service.
Our team can help you choose the right products for your installation.