Which firmware does this application cover?

The manual and related ETS application apply to firmware V2.00 and above.

How can I read the installed firmware?

Read the Firmware communication object to obtain the version as a text string. The device also sends this object automatically at power-up.

This user manual and related ETS application is valid for firmware versions V2.00 and above.

A “Firmware” group object is available on the device to read the firmware version as a string. It is also automatically sent at power up.

TECHNICAL DATA	VALUE
Power supply	External 12VDC
Power consumption KNX bus typ.	< 16 mA @ 29VDC
Operating temperature	5 to + 45°C
Enclosure	Optional DIN-rail housing
Dimensions (W x D x H)	81 x 29 x 20mm
Mounting	1 screw holes for mounting in the Jablotron control panel
KNX terminal	Pluggable micro terminal, Red/Black, 4 pole PUSH WIRE for solid conductor wire 0.6-0.8 mm²
12VDC terminal	Screw terminal 12VDC / GND To be supplied from Jablotron panel or an external power supply
RS485 terminal	Screw terminal D+(A) / D- (B)
Configurable input/output (PG)	32
Configurable zones	4
KNX bus voltage	29 VDC
RS485 voltage	3.3 VDC

Product information and support: elausys.com.