Built for your installation
Servers, touchscreens and gateways. Everything working together.
Extension module for the Elausys Universal KNX Actuator System adding 24 relay channels of 10 A / 230 VAC in 9 SU. Each channel is a switching output or half of a blind pair — up to 12 blinds on one module — with the master's delays, staircase, scene and blocking functions. Connects to the MSA-810 master actuator with the side connector and is configured in ETS through the master's application.
Extension module for the Elausys Universal KNX Actuator System adding 8 relay channels of 16 A / 230 VAC. For water heaters, electric radiators, socket circuits and large lighting groups that exceed 10 A, with dual terminals per channel and the master's switching and blind functions. Connects to the MSA-810 master actuator with the side connector and is configured in ETS through the master's application.
Extension module for the Elausys Universal KNX Actuator System adding 8 relay channels of 10 A / 230 VAC. Each channel is a switching output or half of a blind pair, with the same delays, staircase, scene and blocking functions as the master. Connects to the MSA-810 master actuator with the side connector and is configured in ETS through the master's application.
Extension module for the Elausys Universal KNX Actuator System adding 8 PWM channels of 2 A for 12–24 VDC LED strips. Channels work as single-colour dimmers or grouped as RGB, RGBW or Tunable White, with dimming curves and day/night values — constant-voltage LED control without a separate KNX LED controller. Connects to the MSA-810 master actuator with the side connector and is configured in ETS through the master's application.
Extension module for the Elausys Universal KNX Actuator System adding 8 outputs for electrothermic heating valves, 24–230 VAC / 0.5 A. Each output runs on/off, PWM or a built-in PI temperature controller, with valve protection and short-circuit detection — for underfloor heating manifolds, radiator valves and fan coil units. Connects to the MSA-810 master actuator with the side connector and is configured in ETS through the master's application.
Extension module for the Elausys Universal KNX Actuator System adding 2 phase-dimming channels of 250 W. Leading or trailing edge per channel, dimmable LED from 2 W, and a parallel mode that joins both channels for one 500 W load — for 230 V halogen, incandescent, wound transformers and dimmable LED lamps. Connects to the MSA-810 master actuator with the side connector and is configured in ETS through the master's application.
Extension module for the Elausys Universal KNX Actuator System adding 8 low-voltage digital outputs, 0.25 A at 12–30 VDC. For 24 V electrothermic valves, relay and contactor coils and indicator LEDs, with switch, blind-pair and heating-valve modes (on/off, PWM, PI). Connects to the MSA-810 master actuator with the side connector and is configured in ETS through the master's application.
Extension module for the Elausys Universal KNX Actuator System adding a DALI bus master for 64 ballasts or 16 groups. DALI addressing, testing and group assignment run from a built-in web page; lamp status and ballast failure are reported per address on the KNX bus. Connects to the MSA-810 master actuator with the side connector and is configured in ETS through the master's application.
Extension module for the Elausys Universal KNX Actuator System adding 4 analogue outputs 0–10 V. Each output works as a plain analogue value, a PI temperature controller for valves, a single-channel dimmer or part of an RGB / RGBW / Tunable White group — for 0–10 V valve actuators, fan controllers and LED drivers. Connects to the MSA-810 master actuator with the side connector and is configured in ETS through the master's application.
Our team can help you choose the right products for your installation.