Built for your installation
The Elausys actuator system starts with the MSA-810 master, an 8-channel 10 A KNX switch actuator with 64 logic functions. Extensions clip onto it and share its KNX bus address, so one device grows to up to 72 channels depending on the configuration.
Extensions cover switching at 10 A and 16 A, a 24-channel relay module, universal dimming, 12–24 V LED strips, heating valves, 24 V digital outputs, 0-10 V analog outputs and a DALI gateway for 64 ballasts. Relay channels can be paired to drive blinds. The whole assembly is configured in ETS.
See also:The modular actuator system
The MSA-810 is a KNX master actuator with eight 10 A relay outputs for switching or blind control. Add compatible extensions for heating, dimming, DALI, LED, and analogue control within one ETS application and KNX address. System capacity depends on the selected modules.
The SAE-2410 is a 24-channel switching extension for the MSA-810 KNX master actuator, with potential-free contacts rated at 10 A / 230 VAC per channel for resistive loads. It requires an MSA-810 master and is configured through the master’s ETS application.
The DATEC 1630.03160/61100 is a flush-mounted KNX actuator with four 10 A relay outputs for switching or blind control, eight dry-contact inputs and four status LED outputs. Use individual outputs for switching circuits or pair them to control up to two blinds or shutters.
The SAE-816 is an eight-channel switching extension for the MSA-810 KNX master actuator, with potential-free contacts rated at 16 A / 230 VAC per channel for resistive loads. It requires an MSA-810 master and is configured through the master’s ETS application.
The SAE-810 is an eight-channel switching extension for the MSA-810 KNX master actuator, with potential-free contacts rated at 10 A / 230 VAC per channel for resistive loads. It requires an MSA-810 master and is configured through the master’s ETS application.
The LAE-802 is an eight-channel PWM LED extension for the MSA-810 KNX master actuator, supporting compatible 12–24 VDC constant-voltage strips at up to 2 A per channel. It requires an MSA-810 master and is configured through the master’s ETS application.
The HAE-805 is an eight-channel heating-valve extension for the MSA-810 KNX master actuator, supporting 24–230 VAC electrothermic actuators at up to 0.5 A per output. It requires an MSA-810 master and is configured through the master’s ETS application.
The DAE-225 is a two-channel phase-dimming extension for the MSA-810 KNX master actuator, rated up to 250 W per channel for halogen or incandescent lamps. It requires an MSA-810 master and is configured through the master’s ETS application.
The DOE-825 is an eight-channel transistor-output extension for the MSA-810 KNX master actuator, rated at 0.25 A per channel for 12–30 VDC resistive loads. It requires an MSA-810 master and is configured through the master’s ETS application.
The DBE-64 is a DALI extension for the MSA-810 KNX master actuator, supporting up to 64 DALI control-gear addresses and 16 DALI groups. Commission DALI devices through the system’s web interface. It requires an MSA-810 master and is configured through the master’s ETS application.
The AAE-410 is a four-channel 0–10 V analogue-output extension for the MSA-810 KNX master actuator. It requires an MSA-810 master and is configured through the master’s ETS application.
Our team can help you choose the right products for your installation.